2021/6/9 Project 2 https://canvas.vt.edu/courses/131840/assignments/1195003 1/5 Unlimited Attempts 2021/5/302021/6/14 Details CS 3304 Project #2 In this assignment, you are going to implement an interpreter for (a subset of) the language Forth using Haskell. We begin by describing Forth and then some guidelines on implementing your interpreter. What is FORTH? Forth is a cute language meant for control and embedded systems applications. It comes with a lot of functionality, but for this assignment, you will be implementing only a small subset of the entire language. You can read more about Forth at, e.g., the pForth website (http://www.softsynth.com/pforth/) . The central entity in Forth is a stack. You push things onto the stack and do operations from there. A Forth program is a bunch of “words” with spaces between them. For instance, the following is a simple Forth program: 23 7 91 All it does is to push the three above numbers onto the stack. 91 is on top and 23 is at the bottom (last in, first out). Here’s another Forth program: 23 7 91 . The only difference between this and the previous is the “dot” (.) at the end of it. The “dot” pops (removes) the top element off the stack and prints it. After this, only two numbers are remaining (23 and 7) on the stack. 7 is on the top. The next command we will encounter is “.S” (dot-S). Consider the program: 23 7 91 .S Project 2 2021/6/13 100 Possible Points IN PROGRESS Next Up: Submit AssignmentAttempt 1 View Feedback Submit Assignment 2021/6/9 Project 2 https://canvas.vt.edu/courses/131840/assignments/1195003 2/5 This causes as output “23 7 91”. dot-S prints the entire stack (topmost element is printed rightmost) but doesn’t remove anything. So, we can put things onto the stack and remove them. The following program leaves the stack empty, but causes as output “91 7 23”. 23 7 91 . . . We can also do arithmetic operations on the stack. “+” takes the top two elements off the stack, adds them, and pushes the result back. Similarly for “-”, “*”, and “/”. So, 4 5 + . causes “9” to be printed and leaves the stack empty. 4 5 - . causes “-1” to be printed and leaves the stack empty. Some other useful operations in Forth are given now. DUP duplicates the topmost element of the list. 77 DUP .S causes “77 77” to be printed (and the stack now contains these two integers). Similarly, SWAP swaps the topmost two elements on the stack. 8 7 SWAP .S prints “7 8”. DROP drops the topmost element from the stack (unlike “dot”, it doesn’t print anything). OVER causes a copy of the second element on the stack to leapfrog over the first. So, 8 9 OVER .S causes “8 9 8” to be printed (and remain on the stack). Finally, ROT takes the third element from the stack and moves it to the top. 7 8 9 ROT .S prints “8 9 7” (and this also remains on the stack). As more examples, 11 22 33 SWAP DUP causes “11 33 22 22” to be on the stack (doesn’t print anything). Similarly, 11 22 33 ROT DROP causes “22 33” to be on the stack (doesn’t print anything). For your assignment, you only have to support the above commands (words). Furthermore, you can assume that only integers can beSubmit Assignment 2021/6/9 Project 2 https://canvas.vt.edu/courses/131840/assignments/1195003 3/5 pushed onto the stack. A syntactically correct FORTH program is simply a string that contains any combination of integers and FORTH words, separated by white space. When printing using “dot” or “dot-S” you can assume that all printings are on the same line, with spaces in between the elements printed. Command Summary . pops the top of the stack and displays it. .S displays the stack with the top on the right + * / - performs the math operator on the top two stack operands and pushes the result back on the stack DUP duplicates the top element on the stack SWAP switches the first and second two elements on the stack DROP drops the topmost element from the stack OVER copies the second element in the stack and pushes it on top ROT takes the third element on the stack and puts it on top An Interpreter in Haskell The operation of the interpreter is to read a set of lines from a file named “input.txt” (which will be in the current directory), where each line is a string denoting a syntactically correct FORTH program. The interpreter will process this program and return a tuple (a,b) which is printed onto a file named “output.txt” (in the same directory). “a” is a string that contains the result of all the printings that happen during the execution of the program. “b” is a string that identifies what is remaining on the stack (again topmost element to the right). For each line in the input, there is a corresponding line in the output. For instance, for the input 11 22 33 ROT DROP . the output is ("33","22") (yes you have to print those brackets and quotes). For the input 11 1 3 4 + 5 7 DROP . .S the output is ("5 11 1 7","11 1 7") If something illegal is attempted, your interpreter should print (illegal,illegal) Submit Assignment 2021/6/9 Project 2 https://canvas.vt.edu/courses/131840/assignments/1195003 4/5 This can happen, for instance, when dot/DUP/DROP is attempted on an empty stack, the arithmetic operations/SWAP/OVER are attempted on a stack that contains less than two elements, or when ROT is attempted on a stack that contains less than three elements. If nothing is printed by the program, or if the stack is empty, you should substitute an empty string ("") in the appropriate place in the returned tuple. For instance, 3 2 . . produces ("2 3","") Implementation Guidelines Your implementation must adhere to the tenets of functional programming. Specifically, your program must utilize recursion and higher-order functions to the fullest extent. It must also be free of side effects with the exception of input/output. You may not use any imperative features of Haskell (remember the language does have some impurities). You may use let s however as they do not run contrary to the spirit of functional programming. Absolutely no iteration is permitted (use recursion). Your program must contain at least one curry-able function and you must make use of some curried form of it in your solution. Adopt an iterative development approach. E.g., prepare your interpreter to first handle simple pushing and popping off stack, and then proeed to add the more complex FORTH words. You might want to check out the Haskell supplied Prelude (https://hackage.haskell.org/package/base-4.14.1.0/docs/Prelude.html) to see if there are any useful functions and datatypes provided. See also the code from the lecture summaries. (These will be coming soon, i.e. next week at the latest) Submitting Your Program Your Haskell implementation is to be organized in a single file. The file will use a .hs extension. I’m working on getting Haskell installed on rlogin. I’m pretty sure you can get easy to install Haskell installers for all major OSs. All documentation and identifying information should be placed in comments within the single source file. The comments at the beginning of the file should identify the assignment and give your full name. Every Haskell function should be preceded by comments explaining its purpose, the meaning of each parameter, and the general strategy of its implementation if applicable. Your program will be submitted electronically most likely to Canvas. After the last attempt to get the compiler on Web-CAT I’m not thinking this will be there either. Now that I have the gradingSubmit Assi nment 2021/6/9 Project 2 https://canvas.vt.edu/courses/131840/assignments/1195003 5/5 scripts developed, I should be able to start running the grading pretty close to when you start submitting. Sample Files linux_examples.zip (https://canvas.vt.edu/courses/131840/files/18867291?wrap=1) (https://canvas.vt.edu/courses/131840/files/18867291/download?download_frd=1) windows_examples.zip (https://canvas.vt.edu/courses/131840/files/18867290?wrap=1) (https://canvas.vt.edu/courses/131840/files/18867290/download?download_frd=1) So these files are named input_#.txt and output_#.txt where # is a number. To use them you'll need rename the input file from input_#.txt to input.txt and then run your program. The corresponding output_#.txt should then match your output.txt. Drag a file here, or Choose a file to upload File permitted: HS More Options Submit Assignment























































































































































学霸联盟