Griffith University School of Engineering and Built Environment Course title: 7305ENG – Advanced steel structures Assessment title: Final design project Due date: Week 11 – Thursday 07/10 at 23:59 pm You are asked to design the hot-rolled steel portal frame, according to the relevant Australian standards, of a warehouse in an Australian’s industrial area. This is project can be submitted individually or as a group of two. You are only required to pre-size your columns and detail your calculations for the leeward rafter only. The location and dimensions of your warehouse is given for each student at the end of this document. Just find your name in the list and design your allocated building. If you are submitting as a group of two, design the building of the student with the lowest student number. You will be solely marked according to the marking criteria posted with this project. So please make sure to answer every single criterion to score marks. The overall shape of the building is given below. To calculate the factored (*) bending moment, axial force and shear force diagrams, you can download a free student version of Space Gass at http://www.spacegass.com/student/. However, you are free to use any other Finite Element software. A tutorial for Space Gass is posted with the project. You are required to learn the software by yourself. Help can be provided during the tutorial sessions if needed. Also please note the following: 1 - All buildings below are scheduled to replace the existing buildings on site. 2 - The new buildings are orientated in the same direction as the existing buildings 3 - There is no roof ventilator on any of the new buildings. 4 - Assume the location of the doors and clearly show where the doors are located. 5 - Make reasonable assumptions and clearly state your assumptions. 6 - Use google map (satellite view) to check the surroundings of the building. 7 - Roof sheet and Purlins: Any certified provider in Australia. 8 - Make sure your building is economically sized. 9 - Design of connections are not required in this project. THE LIST OF THE NEW BUILDINGS STARTS NEXT PAGE Student name: Chamadia, Zain, s5279606 Address of building: 36 Nagle St, East Wagga Wagga NSW 2650 (Wagga Wagga city council) Dimensions of new building: Length (L) = 47 m, Width (W) = 17 m, Height (Ho) = 4.0 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 2 x 3mx4m large entry door(s) and 5 x 1mx3m personnel door(s) Student name: Chowdhury, Priodeep, s5245789 Address of building: 24 Carroll St, Wilsonton QLD 4350 (Toowoomba city council) Dimensions of new building: Length (L) = 55 m, Width (W) = 15 m, Height (Ho) = 5.3 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 1 x 3mx4m large entry door(s) and 1 x 1mx3m personnel door(s) Student name: Devdas, Sahitya, s5206441 Address of building: 36 Murphy St, Invermay TAS 7248 (Launceston city council) Dimensions of new building: Length (L) = 45 m, Width (W) = 16 m, Height (Ho) = 6.5 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 2 x 3mx4m large entry door(s) and 3 x 1mx3m personnel door(s) Student name: Ghalay, Ramesh, s5214260 Address of building: 86 Nettlefold St, Belconnen ACT 2617 (Canberra city council) Dimensions of new building: Length (L) = 63 m, Width (W) = 11 m, Height (Ho) = 5.0 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 3 x 3mx4m large entry door(s) and 1 x 1mx3m personnel door(s) Student name: Ganapatthi Ananth, Aditya Kashyap, s5157069 Address of building: 14 Sargent St, Braitling NT 0870 (Alice Springs city council) Dimensions of new building: Length (L) = 63 m, Width (W) = 12 m, Height (Ho) = 4.2 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 2 x 3mx4m large entry door(s) and 4 x 1mx3m personnel door(s) Student name: Ibe, Emmanuel Ikechukwu, s5144840 Address of building: 80 Lindsay St, Invermay TAS 7248 (Launceston city council) Dimensions of new building: Length (L) = 70 m, Width (W) = 14 m, Height (Ho) = 6.4 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 1 x 3mx4m large entry door(s) and 5 x 1mx3m personnel door(s) Student name: Khutale, Yash Prashant, s5218833 Address of building: 21 Power St, Braitling NT 0870 (Alice Springs city council) Dimensions of new building: Length (L) = 54 m, Width (W) = 10 m, Height (Ho) = 4.1 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 2 x 3mx4m large entry door(s) and 2 x 1mx3m personnel door(s) Student name: Kiprono, Nelly, s5210990 Address of building: 254 Hannell St, Maryville NSW 2293 (Newcastle city council) Dimensions of new building: Length (L) = 46 m, Width (W) = 14 m, Height (Ho) = 5.0 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 2 x 3mx4m large entry door(s) and 1 x 1mx3m personnel door(s) Student name: Liu, Zhenyi, s5151087 Address of building: 57 Deeds Rd, North Plympton SA 5037 (Adelaide city council) Dimensions of new building: Length (L) = 56 m, Width (W) = 16 m, Height (Ho) = 4.4 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 1 x 3mx4m large entry door(s) and 3 x 1mx3m personnel door(s) Student name: Mamae, Thomas, s5212141 Address of building: 36 Patrick St, Hobart TAS 7000 (Hobart city council) Dimensions of new building: Length (L) = 57 m, Width (W) = 9 m, Height (Ho) = 6.1 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 1 x 3mx4m large entry door(s) and 5 x 1mx3m personnel door(s) Student name: Nguyen, Khoa Trong, s5107392 Address of building: 88-90 Auburn St, Wollongong NSW 2500 (Wollongong city council) Dimensions of new building: Length (L) = 42 m, Width (W) = 8 m, Height (Ho) = 5.3 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 3 x 3mx4m large entry door(s) and 4 x 1mx3m personnel door(s) Student name: Patel, Om, s5141931 Address of building: 36 Nagle St, East Wagga Wagga NSW 2650 (Wagga Wagga city council) Dimensions of new building: Length (L) = 140 m, Width (W) = 44 m, Height (Ho) = 6.8 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 1 x 3mx4m large entry door(s) and 1 x 1mx3m personnel door(s) Student name: Patel, Yash, s5197857 Address of building: 1 Carrington Rd, Toowoomba QLD 4350 (Toowoomba city council) Dimensions of new building: Length (L) = 134 m, Width (W) = 39 m, Height (Ho) = 8.4 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 3 x 3mx4m large entry door(s) and 2 x 1mx3m personnel door(s) Student name: Prajapati, Fun Chetankumar, s5144627 Address of building: 213 Railway Terrace, Keswick Terminal SA 5035 (Adelaide city council) Dimensions of new building: Length (L) = 118 m, Width (W) = 36 m, Height (Ho) = 7.4 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 4 x 3mx4m large entry door(s) and 4 x 1mx3m personnel door(s) Student name: Pylla, Dilip Reddy, s5169085 Address of building: 2-6 Hammond Ave, East Wagga Wagga NSW 2650 (Wagga Wagga city council) Dimensions of new building: Length (L) = 107 m, Width (W) = 35 m, Height (Ho) = 6.5 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 3 x 3mx4m large entry door(s) and 4 x 1mx3m personnel door(s) Student name: Ren, Bolin, s5127388 Address of building: 36 Murphy St, Invermay TAS 7248 (Launceston city council) Dimensions of new building: Length (L) = 82 m, Width (W) = 39 m, Height (Ho) = 7.7 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 1 x 3mx4m large entry door(s) and 7 x 1mx3m personnel door(s) Student name: Sawaichi Morioka de Almeida, Luan, s5226680 Address of building: 21 Power St, Braitling NT 0870 (Alice Springs city council) Dimensions of new building: Length (L) = 89 m, Width (W) = 36 m, Height (Ho) = 9.5 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 3 x 3mx4m large entry door(s) and 5 x 1mx3m personnel door(s) Student name: Tran, Thong, s2930961 Address of building: 96 Hoskins St, Mitchell ACT 2911 (Canberra city council) Dimensions of new building: Length (L) = 107 m, Width (W) = 36 m, Height (Ho) = 7.4 m Number of openings: On each wall along the width of the building: 1 x 3mx4m large entry door(s) On each wall along the length of the building: 4 x 3mx4m large entry door(s) and 4 x 1mx3m personnel door(s) Student name: Xu, Fang, s2913704 Address of building: 50 Fitzroy St, Carrington NSW 2294 (Newcastle city council) Dimensions of new building: Length (L) = 145 m, Width (W) = 42 m, Height (Ho) = 7.4 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 3 x 3mx4m large entry door(s) and 4 x 1mx3m personnel door(s) Student name: Yu, Yue, s5117044 Address of building: 10 Ashwin Parade, Torrensville SA 5031 (Adealide city council) Dimensions of new building: Length (L) = 100 m, Width (W) = 38 m, Height (Ho) = 8.5 m Number of openings: On each wall along the width of the building: 2 x 3mx4m large entry door(s) On each wall along the length of the building: 3 x 3mx4m large entry door(s) and 4 x 1mx3m personnel door(s)